Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
2. Engine
3. Transmission
4. Running gear
4.1. Wheels and tires
4.2. Forward and back suspension brackets
4.2.1. Forward and back suspension brackets – general information
4.2.2. Shock-absorber
4.2.3. Back suspension bracket
4.2.4. Components of a forward suspension bracket
4.2.5. Removal, check and installation of a damping rack of a forward suspension bracket
4.2.6. Removal, check and installation of the lower spherical support
4.2.7. Removal and installation of the stabilizer of cross stability of a forward suspension bracket
4.2.8. Components of a back suspension bracket
4.2.9. Removal, check and installation of a damping rack of a back suspension bracket
4.3. Tables
5. Steering
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment




80e768f8

4-2-7-snyatie-i-ustanovka-stabilizatora-poperechnojj-ustojjchivosti-perednejj-podveski.html

4.2.7. Removal and installation of the stabilizer of cross stability of a forward suspension bracket

Remove forward wheels.

Fig. 4.33. Nuts of fastening of a rack of the stabilizer of cross stability


Turn off 2 nuts of fastening and disconnect the left and right racks of the stabilizer of cross stability from the lower lever (fig. 4.33).

ATTENTION
If the axis of the spherical hinge is turned together with a nut, use a hexagonal wrench (on 6 mm) to hold a rack.

Remove a damper of a frame of a forward suspension bracket.

Fig. 4.34. Fastening of a collar of a damper of the stabilizer of cross stability


Turn off 2 bolts of a collar and remove a damper of the stabilizer of cross stability (fig. 4.34).
Remove the stabilizer of cross stability. Remove it on the left side.

Fig. 4.35. Check of the moment of scrolling of the spherical hinge of a rack of the stabilizer


Check the moment of scrolling of the spherical hinge of a rack of the stabilizer (fig. 4.35).
Using a dynamometer key, rotate a nut continuously (one turn for 2–4 c) and read the instrument on the fifth turn.
Scrolling moment: 0,05–1,96 N · m.

Fig. 4.36. Scheme of installation of a damper of the stabilizer of cross stability


Establish a damper of the stabilizer of cross stability. Establish it by the back party turned to inside of the stabilizer (fig. 4.36).
Establish other details as it should be, the return to removal.

"previous page
4.2.6.3. Installation
following page"
4.2.8. Components of a back suspension bracket