Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
2. Engine
3. Transmission
4. Running gear
4.1. Wheels and tires
4.2. Forward and back suspension brackets
4.2.1. Forward and back suspension brackets – general information
4.2.2. Shock-absorber
4.2.3. Back suspension bracket
4.2.4. Components of a forward suspension bracket
4.2.5. Removal, check and installation of a damping rack of a forward suspension bracket
4.2.6. Removal, check and installation of the lower spherical support
4.2.7. Removal and installation of the stabilizer of cross stability of a forward suspension bracket
4.2.8. Components of a back suspension bracket
4.2.9. Removal, check and installation of a damping rack of a back suspension bracket
4.2.9.1. Removal
4.2.9.2. Check
4.2.9.3. Installation
4.3. Tables
5. Steering
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment




80e768f8

4-2-9-1-snyatie.html

4.2.9.1. Removal

Remove back wheels.

Fig. 4.38. Removal of a back seat


Remove lock clip-on earrings of a pillow of a back seat. Nominate him and, supporting from below, remove (fig. 4.38).
Remove a back of a back seat.
Remove internal finishing of a back part of salon.
Remove fastenings of back seat belts.

Fig. 4.39. Nut of fastening of a rack of the stabilizer of cross stability of a back suspension bracket


Turn off a nut of fastening of a rack of the stabilizer of cross stability of a back suspension bracket (fig. 4.39).

Fig. 4.40. Bolts of fastening of the holder of a brake hose and plait of wires of the sensor of frequency of rotation (ABS)


Turn off 2 bolts, remove a brake hose and a plait of wires of the sensor of frequency of rotation (ABS) from a damping rack (fig. 4.40).

Fig. 4.41. Nuts of the lower fastening of a rack of the shock-absorber


Weaken two nuts of fastening from the lower party of a rack of the shock-absorber (fig. 4.41).
Put a jack under a rotary fist.
Remove a protective cover of a rack of the shock-absorber.

Fig. 4.42. Central nut of the top support of a rack


Weaken the central nut of the top support of a rack (fig. 4.42).

ATTENTION
Do not remove a nut.


Fig. 4.43. Nuts of fastening of the top support of a rack


Turn off 3 nuts of fastening of the top support of a rack (fig. 4.43).
Remove a jack from under a rotary fist.
Otvergite finally bolts of the lower fastening of a rack of the shock-absorber.
Remove a shock-absorber rack assembled.

Fig. 4.44. Fixing of a rack of the shock-absorber in a vice


Establish a bolt and two nuts on the lower arm of a rack of the shock-absorber and fix a rack in a vice (fig. 4.44).

Fig. 4.45. Compression of a spring by means of the special tool


Using the special tool 09727-30021, squeeze a spring (fig. 4.45).
Finally turn off the central nut of fastening of the top support of a rack and remove a rack support. Sort a rack, having removed a spring, the limiter of the course of compression and the lower insulator of a spring.

"previous page
4.2.9. Removal, check and installation of a damping rack of a back suspension bracket
following page"
4.2.9.2. Check