Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
2. Engine
3. Transmission
4. Running gear
5. Steering
5.1. General information
5.2. Preliminary checks
5.2.1. Check of a side play of a steering wheel
5.2.2. Check of level of working liquid of the hydraulic booster
5.2.3. Check of pressure of working liquid of the hydraulic booster
5.2.4. Check of effort on a steering wheel
5.2.5. Pumping of system of the amplifier of steering
5.2.6. Steering mechanism components
5.2.7. Precautionary measures during the work with system of passive safety (SRS)
5.2.8. Removal and installation of a steering wheel and steering column
5.2.8.1. Removal of a steering wheel and finishing from the driver
5.2.8.2. Removal and check of a steering column
5.2.8.3. Check and replacement of the cylinder of the lock of ignition
5.2.8.4. Assembly and installation of a steering column
5.2.9. Removal and installation of the pump of the hydraulic booster of steering
5.3. Tables
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment




80e768f8

5-2-8-3-proverka-i-zamena-cilindra-zamka-zazhiganiya.html

5.2.8.3. Check and replacement of the cylinder of the lock of ignition

Check the blocking mechanism. Make sure that the mechanism of blocking of a steering wheel works properly.

Fig. 5.32. Extraction of the cylinder of the lock of ignition


Install the ignition key in the provision of "ASS". Drown a lock pin a thin core or the screw-driver and take the cylinder of the lock (fig. 5.32).
Before installation of the cylinder of the lock check that the larva of the lock was in the provision of "ASS".
Drown the lock cylinder in the case.
Remove a key and be convinced that the cylinder strongly sat down in a case nest.
Again insert a key and make sure that the lock works in all provisions of inclusion.

"previous page
5.2.8.2. Removal and check of a steering column
following page"
5.2.8.4. Assembly and installation of a steering column