Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
2. Engine
3. Transmission
4. Running gear
5. Steering
5.1. General information
5.2. Preliminary checks
5.2.1. Check of a side play of a steering wheel
5.2.2. Check of level of working liquid of the hydraulic booster
5.2.3. Check of pressure of working liquid of the hydraulic booster
5.2.4. Check of effort on a steering wheel
5.2.5. Pumping of system of the amplifier of steering
5.2.6. Steering mechanism components
5.2.7. Precautionary measures during the work with system of passive safety (SRS)
5.2.8. Removal and installation of a steering wheel and steering column
5.2.8.1. Removal of a steering wheel and finishing from the driver
5.2.8.2. Removal and check of a steering column
5.2.8.3. Check and replacement of the cylinder of the lock of ignition
5.2.8.4. Assembly and installation of a steering column
5.2.9. Removal and installation of the pump of the hydraulic booster of steering
5.3. Tables
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment




80e768f8

5-2-8-snyatie-i-ustanovka-rulevogo-kolesa-i-rulevojj-kolonki.html

5.2.8. Removal and installation of a steering wheel and steering column




In the steering mechanism there is a rotary valve of control directing liquid from the pump of the hydraulic booster of steering to one or other party of the piston of a gear lath of the steering mechanism. The piston and a gear lath make one integral part of the steering mechanism. The piston of a gear lath transforms liquid pressure to the linear force which moves a lath on the left or to the right.
This force is transmitted through steering drafts and tips of steering drafts on rotary fists which turn forward wheels. At malfunction of the hydraulic booster driving is exercised in the usual mode. However at the same time it is necessary to make bigger effort. Rotary motion of a steering wheel is transferred to a gear wheel. At rotation of a gear wheel teeths of a gear wheel are hooked with lath teeths, thereby force a lath to move.

"previous page
5.2.7. Precautionary measures during the work with system of passive safety (SRS)
following page"
5.2.8.1. Removal of a steering wheel and finishing from the driver