Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
2. Engine
3. Transmission
4. Running gear
5. Steering
5.1. General information
5.2. Preliminary checks
5.2.1. Check of a side play of a steering wheel
5.2.2. Check of level of working liquid of the hydraulic booster
5.2.3. Check of pressure of working liquid of the hydraulic booster
5.2.4. Check of effort on a steering wheel
5.2.5. Pumping of system of the amplifier of steering
5.2.6. Steering mechanism components
5.2.7. Precautionary measures during the work with system of passive safety (SRS)
5.2.8. Removal and installation of a steering wheel and steering column
5.2.9. Removal and installation of the pump of the hydraulic booster of steering
5.2.9.1. Removal
5.2.9.2. Check of the perepuskny valve
5.2.9.3. Installation
5.3. Tables
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment




80e768f8

5-2-9-2-proverka-perepusknogo-klapana.html

5.2.9.2. Check of the perepuskny valve

Turn out the sensor of pressure of working liquid from the perepuskny valve.

Fig. 5.44. Extraction of the perepuskny valve


Unscrew perepuskny the valve and remove laying (fig. 5.44).

Fig. 5.45. Check of the perepuskny valve


Wash out the valve working liquid and check it for leak. For this purpose close the lower opening and force compressed air of 392-490 kPa in an opposite opening. Make sure that air does not come out from an otvestiya on the end of the valve. If there is a leak, replace perepuskny the valve (fig. 5.45).

"previous page
5.2.9.1. Removal
following page"
5.2.9.3. Installation