Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
2. Engine
3. Transmission
4. Running gear
5. Steering
5.1. General information
5.2. Preliminary checks
5.2.1. Check of a side play of a steering wheel
5.2.2. Check of level of working liquid of the hydraulic booster
5.2.3. Check of pressure of working liquid of the hydraulic booster
5.2.4. Check of effort on a steering wheel
5.2.5. Pumping of system of the amplifier of steering
5.2.6. Steering mechanism components
5.2.7. Precautionary measures during the work with system of passive safety (SRS)
5.2.8. Removal and installation of a steering wheel and steering column
5.2.9. Removal and installation of the pump of the hydraulic booster of steering
5.2.9.1. Removal
5.2.9.2. Check of the perepuskny valve
5.2.9.3. Installation
5.3. Tables
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment




80e768f8

5-2-9-3-ustanovka.html

5.2.9.3. Installation

Establish new laying and tighten perepuskny the valve.

Fig. 5.46. Installation of the delivery pipeline



NOTE
Establish a stopper of the delivery pipeline so that it concerned a forward arm, as shown in the figure 5.46, and tighten perepuskny the valve.

Install the pump assembled with the delivery pipeline.
Establish a driving belt of the pump of the hydraulic booster.

Fig. 5.47. Tightening of a bolt "And"


Using a dynamometer key with a length of support of 345 mm, tighten a bolt "And" (fig. 5.47).
The inhaling moment with use of the special tool and a dynamometer key of long 345 mm: 29 N · m.
Tighten a bolt "In".
Inhaling moment: 43 N · m.

NOTE
The moment of an inhaling will be correct if the special tool is located parallel to a dynamometer key.

Connect the socket to the sensor of pressure of working liquid.
Install two plugs, two plates of the holder and tighten a bolt.
Inhaling moment: 10 N · m.
Connect a returnable hose.
Establish the right protective apron and tighten two bolts.
Pump over system of the amplifier of steering.

"previous page
5.2.9.2. Check of the perepuskny valve
following page"
5.3. Tables