Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
2. Engine
3. Transmission
4. Running gear
5. Steering
6. Brake system
6.1. General information
6.1.1. Vacuum amplifier of brakes
6.1.2. Main brake cylinder
6.1.3. Pressure regulator
6.1.4. Sensor of level of brake fluid
6.2. Anti-blocking system of brakes (ABS)
6.3. Check and adjustment of elements of the brake system
6.4. Check of level of brake fluid in a tank of a hydraulic actuator of working ormozny system
6.5. Brake hoses
6.6. Adjustment of a pedal of a brake
6.7. Removal of air from a hydraulic actuator of the working brake system
6.8. Check and adjustment of the parking brake
6.9. Removal, dismantling, assembly and installation of the main brake cylinder
6.10. Check, removal and installation of the vacuum amplifier of brakes
6.11. Replacement of front brake shoes, removal, dismantling and installation of a forward support
6.12. Replacement of back brake shoes, removal, dismantling and installation of a back support
6.13. Dismantling, check and assembly of the brake mechanism of the parking brake
6.14. Removal and installation of the sensor of speed of rotation of a forward wheel
6.15. Removal and installation of the modulator of pressure
6.16. Removal and installation of a pedal of a brake
6.17. Tables
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment




80e768f8

6-1-obshhie-svedeniya.html

6.1. General information




The cars described in the management are equipped with the brake system with the hydraulic drive. Forward brakes disk, back brakes – disk or drum. All brakes are equipped with automatic adjustment of gaps of brake shoes. Wear of blocks of forward disk brakes is compensated automatically, for a back disk brake the mechanism of adjustment of a gap of blocks is provided.

Fig. 6.1. Brake mechanism of the Camry car


The hydraulic system consists of two separate contours (fig. 6.1). The main brake cylinder includes separate tanks for two contours, in case of leak of liquid or damage to one of hydraulic drives another remains acting. The double regulator of pressure distributes hydraulic pressure between forward and back brake mechanisms for the purpose of prevention of blocking of back wheels. The warning of the insufficient level of brake fluid moves the control lamp activated by the sensor in a tank of the main brake cylinder.

Fig. 6.2. Parking brake of the Camry car: 1 – lock-nut; 2 – adjusting nut; 3 – lever of the hand parking brake assembled; 4 – switch of the parking brake; 5 – cable of the parking brake; 6 – lever of the pedal parking brake assembled; 7 –


The parking brake (fig. 6.2) mechanically includes only back brakes. It is activated when raising the lever on the central console between front seats. On the Camry car the option of execution of the pedal drive of the parking brake system is provided.

"previous page
6. Brake system
following page"
6.1.1. Vacuum amplifier of brakes