Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
2. Engine
3. Transmission
4. Running gear
5. Steering
6. Brake system
6.1. General information
6.2. Anti-blocking system of brakes (ABS)
6.3. Check and adjustment of elements of the brake system
6.4. Check of level of brake fluid in a tank of a hydraulic actuator of working ormozny system
6.5. Brake hoses
6.6. Adjustment of a pedal of a brake
6.7. Removal of air from a hydraulic actuator of the working brake system
6.8. Check and adjustment of the parking brake
6.9. Removal, dismantling, assembly and installation of the main brake cylinder
6.10. Check, removal and installation of the vacuum amplifier of brakes
6.10.1. Check of operation of the vacuum amplifier
6.10.2. Tightness check
6.10.3. Removal
6.10.4. Check and adjustment of length of the speaker of a rod
6.10.5. Installation
6.11. Replacement of front brake shoes, removal, dismantling and installation of a forward support
6.12. Replacement of back brake shoes, removal, dismantling and installation of a back support
6.13. Dismantling, check and assembly of the brake mechanism of the parking brake
6.14. Removal and installation of the sensor of speed of rotation of a forward wheel
6.15. Removal and installation of the modulator of pressure
6.16. Removal and installation of a pedal of a brake
6.17. Tables
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment




80e768f8

6-10-2-proverka-germetichnosti.html

6.10.2. Tightness check

Start the engine and let's it work on single turns about 1 min. Muffle it, having given vacuum to the amplifier. Several times press a brake pedal with usual effort and produce the available vacuum. Make sure that when pressing a brake pedal the gap between a pedal of a brake and the panel of a floor gradually increases. Start the engine. Press a pedal of a brake and hold it pressed, then kill the engine. Take a pedal of the pressed about 30 Sealy more and be convinced that the course of a pedal does not change.

"previous page
6.10.1. Check of operation of the vacuum amplifier
following page"
6.10.3. Removal