Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
2. Engine
3. Transmission
4. Running gear
5. Steering
6. Brake system
6.1. General information
6.2. Anti-blocking system of brakes (ABS)
6.3. Check and adjustment of elements of the brake system
6.4. Check of level of brake fluid in a tank of a hydraulic actuator of working ormozny system
6.5. Brake hoses
6.6. Adjustment of a pedal of a brake
6.7. Removal of air from a hydraulic actuator of the working brake system
6.8. Check and adjustment of the parking brake
6.9. Removal, dismantling, assembly and installation of the main brake cylinder
6.10. Check, removal and installation of the vacuum amplifier of brakes
6.10.1. Check of operation of the vacuum amplifier
6.10.2. Tightness check
6.10.3. Removal
6.10.4. Check and adjustment of length of the speaker of a rod
6.10.5. Installation
6.11. Replacement of front brake shoes, removal, dismantling and installation of a forward support
6.12. Replacement of back brake shoes, removal, dismantling and installation of a back support
6.13. Dismantling, check and assembly of the brake mechanism of the parking brake
6.14. Removal and installation of the sensor of speed of rotation of a forward wheel
6.15. Removal and installation of the modulator of pressure
6.16. Removal and installation of a pedal of a brake
6.17. Tables
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment




80e768f8

6-10-3-snyatie.html

6.10.3. Removal

Do not deform and do not bend brake tubes and hoses at removal and installation of the amplifier of a brake. Replace an earring finger if it is injured. Do not damage a carving of hairpins of the amplifier of a brake. If to incline it at installation, it is possible to damage a carving about a partition.
Disconnect vacuum tubes from the amplifier of a brake.
Remove the main cylinder.
Take out the forelock and a finger from an earring from passenger salon. Remove press a rod from a brake pedal.
Turn off fixing nuts of the amplifier of a brake and a pedal of a brake assembled.
Take out the amplifier of a brake from a motor compartment.

"previous page
6.10.2. Tightness check
following page"
6.10.4. Check and adjustment of length of the speaker of a rod