Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
2. Engine
3. Transmission
4. Running gear
5. Steering
6. Brake system
6.1. General information
6.2. Anti-blocking system of brakes (ABS)
6.3. Check and adjustment of elements of the brake system
6.4. Check of level of brake fluid in a tank of a hydraulic actuator of working ormozny system
6.5. Brake hoses
6.6. Adjustment of a pedal of a brake
6.7. Removal of air from a hydraulic actuator of the working brake system
6.8. Check and adjustment of the parking brake
6.9. Removal, dismantling, assembly and installation of the main brake cylinder
6.10. Check, removal and installation of the vacuum amplifier of brakes
6.10.1. Check of operation of the vacuum amplifier
6.10.2. Tightness check
6.10.3. Removal
6.10.4. Check and adjustment of length of the speaker of a rod
6.10.5. Installation
6.11. Replacement of front brake shoes, removal, dismantling and installation of a forward support
6.12. Replacement of back brake shoes, removal, dismantling and installation of a back support
6.13. Dismantling, check and assembly of the brake mechanism of the parking brake
6.14. Removal and installation of the sensor of speed of rotation of a forward wheel
6.15. Removal and installation of the modulator of pressure
6.16. Removal and installation of a pedal of a brake
6.17. Tables
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment




80e768f8

6-10-proverka-snyatie-i-ustanovka-vakuumnogo-usilitelya-tormozov.html

6.10. Check, removal and installation of the vacuum amplifier of brakes




Operation of the vacuum amplifier of brakes located on a motor board is based on use of depression of an inlet collector and pressure of atmospheric air. After completion of each operation including removal of any of elements of the brake system make a control trip for check of work of brakes of the car. Check brakes at the movement on the pure, dry and flat road. Other test conditions can result in inexact results. Check brakes at various speeds, both at low, and at big load of brakes. The car has to stop evenly, without withdrawal aside. Avoid blocking of brakes as tires are as a result damaged and efficiency and controllability when braking decreases.
Work of brakes is also influenced by a condition of tires, loading of the car and the angles of installation of forward wheels.

"previous page
6.9.3. Check and installation
following page"
6.10.1. Check of operation of the vacuum amplifier