Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
2. Engine
3. Transmission
4. Running gear
5. Steering
6. Brake system
6.1. General information
6.2. Anti-blocking system of brakes (ABS)
6.3. Check and adjustment of elements of the brake system
6.4. Check of level of brake fluid in a tank of a hydraulic actuator of working ormozny system
6.5. Brake hoses
6.6. Adjustment of a pedal of a brake
6.7. Removal of air from a hydraulic actuator of the working brake system
6.8. Check and adjustment of the parking brake
6.9. Removal, dismantling, assembly and installation of the main brake cylinder
6.10. Check, removal and installation of the vacuum amplifier of brakes
6.11. Replacement of front brake shoes, removal, dismantling and installation of a forward support
6.11.1. Visual check of thickness of blocks
6.11.2. Removal of brake shoes
6.11.3. Check of brake shoes
6.11.4. Check of a brake disk and components of the brake mechanism
6.11.5. Measurement of thickness of a brake disk
6.11.6. Measurement of a beating of a brake disk
6.11.7. Assembly
6.12. Replacement of back brake shoes, removal, dismantling and installation of a back support
6.13. Dismantling, check and assembly of the brake mechanism of the parking brake
6.14. Removal and installation of the sensor of speed of rotation of a forward wheel
6.15. Removal and installation of the modulator of pressure
6.16. Removal and installation of a pedal of a brake
6.17. Tables
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment




80e768f8

6-11-4-proverka-tormoznogo-diska-i-komponentov-tormoznogo-mekhanizma.html

6.11.4. Check of a brake disk and components of the brake mechanism

Check whether there is no corrosion, wear and damage on internal walls of the cylinder. If necessary replace the cylinder case. The insignificant defects caused by corrosion or foreign particles can be eliminated with grinding of a surface a small emery cloth. If necessary replace the cylinder case. Check whether there is no wear, cracks and damage. If necessary replace the corresponding component. Check whether there is no corrosion, wear and damage on the surface of the piston. If necessary replace the corresponding component. Check whether there is no corrosion, wear and damage on the directing finger and a boot of the directing finger. If necessary replace the corresponding component. Check whether there is no uneven wear, cracks and serious damages on a surface of a brake disk.

"previous page
6.11.3. Check of brake shoes
following page"
6.11.5. Measurement of thickness of a brake disk