Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
2. Engine
3. Transmission
4. Running gear
5. Steering
6. Brake system
6.1. General information
6.2. Anti-blocking system of brakes (ABS)
6.3. Check and adjustment of elements of the brake system
6.4. Check of level of brake fluid in a tank of a hydraulic actuator of working ormozny system
6.5. Brake hoses
6.6. Adjustment of a pedal of a brake
6.7. Removal of air from a hydraulic actuator of the working brake system
6.8. Check and adjustment of the parking brake
6.9. Removal, dismantling, assembly and installation of the main brake cylinder
6.10. Check, removal and installation of the vacuum amplifier of brakes
6.11. Replacement of front brake shoes, removal, dismantling and installation of a forward support
6.12. Replacement of back brake shoes, removal, dismantling and installation of a back support
6.12.1. Visual check of thickness of blocks
6.12.2. Check of brake shoes
6.12.3. Measurement of thickness of a brake disk
6.12.4. Measurement of a beating of a brake disk
6.12.5. Assembly
6.13. Dismantling, check and assembly of the brake mechanism of the parking brake
6.14. Removal and installation of the sensor of speed of rotation of a forward wheel
6.15. Removal and installation of the modulator of pressure
6.16. Removal and installation of a pedal of a brake
6.17. Tables
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment




80e768f8

6-12-5-sborka.html

6.12.5. Assembly

Fig. 6.59. Installation of a spring ring and cover of the brake cylinder


By means of the screw-driver establish a spring ring of a cover of the brake cylinder and a cover (fig. 6.59).
Establishing a spring ring, do not damage a cover.
Establish the directing fingers.
Inhaling moment: 39 N · m.
By means of a face key (8 mm) and the hammer, establish boots of the directing fingers.
Previously grease boots with lithium lubricant.
Establish fixing bolts of the case of a support.
Inhaling moment: 62 N · m.

Fig. 6.60. Installation of a boot in a support cover


Establish a boot of the directing finger in a support cover, previously having greased it with lithium lubricant (fig. 6.60).
Establish the directing finger in a support cover.

Fig. 6.61. The scheme of installation of the directing finger


Grease a finger with lithium lubricant and, trying not to damage a boot, insert as it is shown in the figure 6.61.
Establish a new set of brake shoes.
Establish a support cover.
Carry out other assembly as it should be, the return to removal.
Establish back wheels.
Check the level of brake fluid.

"previous page
6.12.4. Measurement of a beating of a brake disk
following page"
6.13. Dismantling, check and assembly of the brake mechanism of the parking brake