Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
2. Engine
3. Transmission
4. Running gear
5. Steering
6. Brake system
6.1. General information
6.2. Anti-blocking system of brakes (ABS)
6.3. Check and adjustment of elements of the brake system
6.4. Check of level of brake fluid in a tank of a hydraulic actuator of working ormozny system
6.5. Brake hoses
6.6. Adjustment of a pedal of a brake
6.7. Removal of air from a hydraulic actuator of the working brake system
6.8. Check and adjustment of the parking brake
6.9. Removal, dismantling, assembly and installation of the main brake cylinder
6.10. Check, removal and installation of the vacuum amplifier of brakes
6.11. Replacement of front brake shoes, removal, dismantling and installation of a forward support
6.12. Replacement of back brake shoes, removal, dismantling and installation of a back support
6.13. Dismantling, check and assembly of the brake mechanism of the parking brake
6.14. Removal and installation of the sensor of speed of rotation of a forward wheel
6.15. Removal and installation of the modulator of pressure
6.16. Removal and installation of a pedal of a brake
6.17. Tables
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment




80e768f8

6-14-snyatie-i-ustanovka-datchika-skorosti-vrashheniya-perednego-kolesa.html

6.14. Removal and installation of the sensor of speed of rotation of a forward wheel

Fig. 6.71. Fastenings of the sensor of speed of rotation of a forward wheel


To remove the sensor of speed of rotation of a forward wheel, remove the flap and disconnect the socket of the sensor and a clip, as shown in the figure 6.71.

Fig. 6.72. Release of a plait of wires of the sensor of speed


Turn off a bolt and remove an arm of a flexible hose and a collar of a plait of wires of the sensor (fig. 6.72).

Fig. 6.73. Removal of the sensor of speed


Turn off a bolt and remove the rotation frequency sensor from a rotary fist (fig. 6.73).
Installation is made as it should be, the return to removal.
After installation check operation of the sensor.

"previous page
6.13.3. Assembly
following page"
6.15. Removal and installation of the modulator of pressure