Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
2. Engine
3. Transmission
4. Running gear
5. Steering
6. Brake system
6.1. General information
6.2. Anti-blocking system of brakes (ABS)
6.3. Check and adjustment of elements of the brake system
6.4. Check of level of brake fluid in a tank of a hydraulic actuator of working ormozny system
6.5. Brake hoses
6.6. Adjustment of a pedal of a brake
6.7. Removal of air from a hydraulic actuator of the working brake system
6.8. Check and adjustment of the parking brake
6.9. Removal, dismantling, assembly and installation of the main brake cylinder
6.10. Check, removal and installation of the vacuum amplifier of brakes
6.11. Replacement of front brake shoes, removal, dismantling and installation of a forward support
6.12. Replacement of back brake shoes, removal, dismantling and installation of a back support
6.13. Dismantling, check and assembly of the brake mechanism of the parking brake
6.14. Removal and installation of the sensor of speed of rotation of a forward wheel
6.15. Removal and installation of the modulator of pressure
6.16. Removal and installation of a pedal of a brake
6.17. Tables
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment




80e768f8

6-5-tormoznye-shlangi.html

6.5. Brake hoses

It is necessary to check hoses of the brake system at least two times a year.
For the prevention of sudden failure of the brake system carefully check a condition of all pipelines and connections, paying special attention to the following:
Metal pipelines should not have scratches and the centers of corrosion and have to be located far from sharp edges which can damage them.
The brake hose has to be elastic, not have anguishes and cracks and has to be closed strongly up in tips. The carving of tips of a hose should not have damages. If when pressing a brake pedal the hose is inflated, means threads of cords are torn. At detection of any of these defects the hose needs to be replaced. On hoses the mineral oils and lubricants dissolving rubber should not get.
All brackets of fastening of pipelines have to be whole and are well fixed. Weakening of fastening or destruction of brackets leads to vibration of pipelines which causes their breakages.
Leak of brake fluid from connections of the main cylinder with pipelines and a tank is not allowed.
At detection of malfunctions replace the damaged details new. Irrespective of their state, replace flexible hoses new after 120 thousand km of a run or after five years of operation of the car to warn sudden gaps because of rubber aging. The brake hose rubbing against a suspension bracket detail wears out and finally fails.
For check use a mirror and illumination.

"previous page
6.4. Check of level of brake fluid in a tank of a hydraulic actuator of working ormozny system
following page"
6.6. Adjustment of a pedal of a brake