Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
2. Engine
3. Transmission
4. Running gear
5. Steering
6. Brake system
6.1. General information
6.2. Anti-blocking system of brakes (ABS)
6.3. Check and adjustment of elements of the brake system
6.4. Check of level of brake fluid in a tank of a hydraulic actuator of working ormozny system
6.5. Brake hoses
6.6. Adjustment of a pedal of a brake
6.6.1. Adjustment of height of a pedal of a brake
6.6.2. Check of a free wheeling of a pedal
6.6.3. Check of a stock of the course of a pedal
6.6.4. Check of working capacity and tightness of the vacuum amplifier
6.6.5. Valve check of the vacuum amplifier
6.7. Removal of air from a hydraulic actuator of the working brake system
6.8. Check and adjustment of the parking brake
6.9. Removal, dismantling, assembly and installation of the main brake cylinder
6.10. Check, removal and installation of the vacuum amplifier of brakes
6.11. Replacement of front brake shoes, removal, dismantling and installation of a forward support
6.12. Replacement of back brake shoes, removal, dismantling and installation of a back support
6.13. Dismantling, check and assembly of the brake mechanism of the parking brake
6.14. Removal and installation of the sensor of speed of rotation of a forward wheel
6.15. Removal and installation of the modulator of pressure
6.16. Removal and installation of a pedal of a brake
6.17. Tables
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment




80e768f8

6-6-1-regulirovka-vysoty-pedali-tormoza.html

6.6.1. Adjustment of height of a pedal of a brake

Fig. 6.8. Scheme of adjustment of height of a pedal of a brake: 1 – rod; 2 – switch of stoplights; 3 – pedal height


Check and adjust height of a pedal of a brake (fig. 6.8).
Pedal height from a floor: 144,1–154,1 mm
Disconnect the socket of the switch of stoplights.
Weaken a lock-nut and remove the switch of stoplights.
Weaken a rod lock-nut.
Adjust pedal height, turning a rod.
Tighten a rod lock-nut.
Inhaling moment: 26 N · m.
Install the switch of stoplights and rotate it to a light contact with the pedal course limiter.
Unscrew the switch of stoplights on one turn.

Fig. 6.9. Distance between the switch of stoplights and the limiter of the course of a pedal


Check distance "And" between the switch of stoplights and the limiter of the course of a pedal (fig. 6.9).
Distance: 5–10 mm.
Tighten a lock-nut of the switch of stoplights.
Connect the socket of the switch of stoplights.
Make sure that stoplights light up when the pedal of a brake is pressed, and die away when the pedal of a brake is released.
After adjustment of height of a pedal check its free wheeling.

NOTE
If the distance "And" between the switch of stoplights and the limiter of the course of a pedal of a brake was adjusted correctly, the free wheeling of a pedal will correspond to specifications.

"previous page
6.6. Adjustment of a pedal of a brake
following page"
6.6.2. Check of a free wheeling of a pedal