Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
2. Engine
3. Transmission
4. Running gear
5. Steering
6. Brake system
6.1. General information
6.2. Anti-blocking system of brakes (ABS)
6.3. Check and adjustment of elements of the brake system
6.4. Check of level of brake fluid in a tank of a hydraulic actuator of working ormozny system
6.5. Brake hoses
6.6. Adjustment of a pedal of a brake
6.6.1. Adjustment of height of a pedal of a brake
6.6.2. Check of a free wheeling of a pedal
6.6.3. Check of a stock of the course of a pedal
6.6.4. Check of working capacity and tightness of the vacuum amplifier
6.6.5. Valve check of the vacuum amplifier
6.7. Removal of air from a hydraulic actuator of the working brake system
6.8. Check and adjustment of the parking brake
6.9. Removal, dismantling, assembly and installation of the main brake cylinder
6.10. Check, removal and installation of the vacuum amplifier of brakes
6.11. Replacement of front brake shoes, removal, dismantling and installation of a forward support
6.12. Replacement of back brake shoes, removal, dismantling and installation of a back support
6.13. Dismantling, check and assembly of the brake mechanism of the parking brake
6.14. Removal and installation of the sensor of speed of rotation of a forward wheel
6.15. Removal and installation of the modulator of pressure
6.16. Removal and installation of a pedal of a brake
6.17. Tables
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment




80e768f8

6-6-3-proverka-zapasa-khoda-pedali.html

6.6.3. Check of a stock of the course of a pedal

Fig. 6.11. Check of a stock of the course of a pedal of a brake


Lower the lever of the parking brake. At the switched-on engine press a pedal and measure a stock of the course of a pedal (fig. 6.11).
Brake pedal course stock from a floor covering at effort of pressing of 490 N: more than 70 mm
If the stock of the course of a pedal of a brake does not correspond to set, find malfunction of the brake system.

"previous page
6.6.2. Check of a free wheeling of a pedal
following page"
6.6.4. Check of working capacity and tightness of the vacuum amplifier