Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
2. Engine
3. Transmission
4. Running gear
5. Steering
6. Brake system
6.1. General information
6.2. Anti-blocking system of brakes (ABS)
6.3. Check and adjustment of elements of the brake system
6.4. Check of level of brake fluid in a tank of a hydraulic actuator of working ormozny system
6.5. Brake hoses
6.6. Adjustment of a pedal of a brake
6.7. Removal of air from a hydraulic actuator of the working brake system
6.8. Check and adjustment of the parking brake
6.9. Removal, dismantling, assembly and installation of the main brake cylinder
6.10. Check, removal and installation of the vacuum amplifier of brakes
6.11. Replacement of front brake shoes, removal, dismantling and installation of a forward support
6.12. Replacement of back brake shoes, removal, dismantling and installation of a back support
6.13. Dismantling, check and assembly of the brake mechanism of the parking brake
6.14. Removal and installation of the sensor of speed of rotation of a forward wheel
6.15. Removal and installation of the modulator of pressure
6.16. Removal and installation of a pedal of a brake
6.17. Tables
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment




80e768f8

6-8-proverka-i-regulirovka-stoyanochnogo-tormoza.html

6.8. Check and adjustment of the parking brake

Check the size of the course of the lever of turning on of the parking brake.
Pull the lever of turning on of the parking brake against the stop and count the number of clicks.
Movement of the lever of turning on of the parking brake at effort of 200 N: 6–9 clicks
Movement of a pedal of turning on of the parking brake at effort of 300 N: 3–6 clicks
If necessary adjust the course of the lever of turning on of the parking brake.

NOTE
Before adjustment of the parking brake be convinced that the gap of back brake shoes is adjusted (see below).

Remove a decorative casing.

Fig. 6.22. Lock-nut and adjusting nut of the pedal drive of the parking brake system


Weaken a lock-nut and, rotating an adjusting nut, establish the required course of the lever of turning on of the parking brake (fig. 6.22, 6.23).

Fig. 6.23. Lock-nut and adjusting nut of the lever drive of the parking brake system


Tighten a lock-nut.
Inhaling moment: 5,4 N · m for the pedal drive, 5,0 - for the lever drive.
Establish a decorative casing.

"previous page
6.7.2. Pumping of the modulator of pressure of the ABS/VSC system
following page"
6.9. Removal, dismantling, assembly and installation of the main brake cylinder