Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
2. Engine
3. Transmission
4. Running gear
5. Steering
6. Brake system
6.1. General information
6.2. Anti-blocking system of brakes (ABS)
6.3. Check and adjustment of elements of the brake system
6.4. Check of level of brake fluid in a tank of a hydraulic actuator of working ormozny system
6.5. Brake hoses
6.6. Adjustment of a pedal of a brake
6.7. Removal of air from a hydraulic actuator of the working brake system
6.8. Check and adjustment of the parking brake
6.9. Removal, dismantling, assembly and installation of the main brake cylinder
6.9.1. Removal
6.9.2. Dismantling
6.9.3. Check and installation
6.10. Check, removal and installation of the vacuum amplifier of brakes
6.11. Replacement of front brake shoes, removal, dismantling and installation of a forward support
6.12. Replacement of back brake shoes, removal, dismantling and installation of a back support
6.13. Dismantling, check and assembly of the brake mechanism of the parking brake
6.14. Removal and installation of the sensor of speed of rotation of a forward wheel
6.15. Removal and installation of the modulator of pressure
6.16. Removal and installation of a pedal of a brake
6.17. Tables
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment




80e768f8

6-9-1-snyatie.html

6.9.1. Removal

ATTENTION
Do not allow hit of brake fluid on the painted surfaces. At hit of brake fluid on the painted surface wash away it immediately.

Merge brake fluid.

NOTE
For models with the engine 1MZ-FE – before works it is necessary to remove the air cleaner assembled.

Disconnect the socket of the sensor of a control lamp of level of brake fluid.

Fig. 6.24. A detachment of brake tubes from the main brake cylinder


Using the special tool 09023-00100, disconnect brake tubes from the main brake cylinder, having turned off 6 connecting nuts (fig. 6.24).

Fig. 6.25. Removal of the main brake cylinder


Turn off two nuts of fastening, remove the union, the main brake cylinder and laying (fig. 6.25).
Uncover and take the mesh filter from a tank of the main brake cylinder.
Turn off the screw of fastening and remove a tank.
Remove two sealing rings.
Install the cylinder in a vice.

"previous page
6.9. Removal, dismantling, assembly and installation of the main brake cylinder
following page"
6.9.2. Dismantling