Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
2. Engine
3. Transmission
4. Running gear
5. Steering
6. Brake system
6.1. General information
6.2. Anti-blocking system of brakes (ABS)
6.3. Check and adjustment of elements of the brake system
6.4. Check of level of brake fluid in a tank of a hydraulic actuator of working ormozny system
6.5. Brake hoses
6.6. Adjustment of a pedal of a brake
6.7. Removal of air from a hydraulic actuator of the working brake system
6.8. Check and adjustment of the parking brake
6.9. Removal, dismantling, assembly and installation of the main brake cylinder
6.9.1. Removal
6.9.2. Dismantling
6.9.3. Check and installation
6.10. Check, removal and installation of the vacuum amplifier of brakes
6.11. Replacement of front brake shoes, removal, dismantling and installation of a forward support
6.12. Replacement of back brake shoes, removal, dismantling and installation of a back support
6.13. Dismantling, check and assembly of the brake mechanism of the parking brake
6.14. Removal and installation of the sensor of speed of rotation of a forward wheel
6.15. Removal and installation of the modulator of pressure
6.16. Removal and installation of a pedal of a brake
6.17. Tables
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment




80e768f8

6-9-3-proverka-i-ustanovka.html

6.9.3. Check and installation

Be convinced of lack of a rust and scratches on a cylinder mirror.
Be convinced of lack of wear and damages of the cylinder.
If it is necessary, replace the cylinder.

ATTENTION
Replace all details included in a repair kit, used for service of the main brake cylinder.
At installation grease rubber details with pure brake fluid for assembly simplification. Do not use production compressed air for drying and cleaning of details of the brake mechanism. It can damage rubber details. If any detail of hydraulic system is removed or disconnected, completely pump over the brake system.
The size of the moments of an inhaling is established for dry, ungreased fastening.
Perform all repair work on the pure workbench cleared of spots of mineral oils.

Carry out installation of all components as it should be, the return to removal.

"previous page
6.9.2. Dismantling
following page"
6.10. Check, removal and installation of the vacuum amplifier of brakes