Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
2. Engine
3. Transmission
4. Running gear
5. Steering
6. Brake system
7. Onboard electric equipment
7.1. General information
7.2. Rechargeable battery
7.3. System of power supply
7.3.1. General information
7.3.2. Generator
7.3.3. Dismantling, check and assembly of the generator
7.3.3.1. Removal of the generator (model with the engine 1 and 2 AZ-FE)
7.3.3.2. Installation of the generator (model with the engine 1 and 2 AZ-FE)
7.3.3.3. Removal of the generator (model with the engine 1 MZ-FE)
7.3.3.4. Installation of the generator (model with the engine 1 MZ-FE)
7.3.3.5. Dismantling of the generator
7.3.3.6. Check of the relay regulator of tension
7.3.3.7. Check of a rotor
7.3.3.8. Check of contact rings
7.3.3.9. Check of the vypryamitelny block
7.3.3.10. Check of brushes
7.3.3.11. Check of bearings
7.3.3.12. Assembly of the generator
7.4. System of electrostart-up
7.5. Checks of onboard electric equipment
7.6. Tables
8. Body
9. Schemes of electric equipment




80e768f8

7-3-3-11-proverka-podshipnikov.html

7.3.3.11. Check of bearings

Check the forward bearing.
Check that the course of the forward bearing was smooth, without jammings.
If necessary replace the bearing.
Unscrew four screws and remove the holder of the bearing.

Fig. 7.28. Vypressovka of the forward bearing


By means of a press and face head (17 mm) to a vpressuyta forward bearing (fig. 7.28).
By means of a special punch press the new forward bearing in a generator cover from the drive.
Establish the holder of the bearing and wrap four screws of its fastening.
Inhaling moment: 3 N · m.

"previous page
7.3.3.10. Check of brushes
following page"
7.3.3.12. Assembly of the generator