Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
2. Engine
3. Transmission
4. Running gear
5. Steering
6. Brake system
7. Onboard electric equipment
7.1. General information
7.2. Rechargeable battery
7.3. System of power supply
7.3.1. General information
7.3.2. Generator
7.3.3. Dismantling, check and assembly of the generator
7.3.3.1. Removal of the generator (model with the engine 1 and 2 AZ-FE)
7.3.3.2. Installation of the generator (model with the engine 1 and 2 AZ-FE)
7.3.3.3. Removal of the generator (model with the engine 1 MZ-FE)
7.3.3.4. Installation of the generator (model with the engine 1 MZ-FE)
7.3.3.5. Dismantling of the generator
7.3.3.6. Check of the relay regulator of tension
7.3.3.7. Check of a rotor
7.3.3.8. Check of contact rings
7.3.3.9. Check of the vypryamitelny block
7.3.3.10. Check of brushes
7.3.3.11. Check of bearings
7.3.3.12. Assembly of the generator
7.4. System of electrostart-up
7.5. Checks of onboard electric equipment
7.6. Tables
8. Body
9. Schemes of electric equipment




80e768f8

7-3-3-2-ustanovka-generatora-modeli-s-dvigatelem-1-i-2-az-fe.html

7.3.3.2. Installation of the generator (model with the engine 1 and 2 AZ-FE)

Install the generator on an arm.
Establish a basic and lock bolt of fastening of the generator, acquire them, but do not twist finally.

Fig. 7.10. Installation of the generator (model with the engine 1 and 2 AZ-FE)


Connect the socket of the generator and fix an electrical wiring (fig. 7.10).

ATTENTION
Do not connect the generator socket, the generator is not installed yet.

Establish a driving belt.
Tighten basic and lock bolts of fastening of the generator.
Tighten bolts of fastening of a clip of a plait of wires and a bolt of fastening of a wire of the generator.
Inhaling moment:
- a basic bolt of M10 – 52 N · m;
- a lock bolt of M8 – 21 N · m;
- a bolt of fastening of a clip of a plait of wires – 8.4 N · m;
- a bolt of fastening of a wire of the generator – 9.8 N · m.

"previous page
7.3.3.1. Removal of the generator (model with the engine 1 and 2 AZ-FE)
following page"
7.3.3.3. Removal of the generator (model with the engine 1 MZ-FE)