Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
2. Engine
3. Transmission
4. Running gear
5. Steering
6. Brake system
7. Onboard electric equipment
7.1. General information
7.2. Rechargeable battery
7.3. System of power supply
7.4. System of electrostart-up
7.4.1. General information
7.4.2. New starter of the PS Camry car
7.4.3. Removal and installation of a starter
7.4.4. Check of work of a starter
7.4.4.1. Check of the relay of a starter
7.4.5. Dismantling, check and assembly of a starter
7.5. Checks of onboard electric equipment
7.6. Tables
8. Body
9. Schemes of electric equipment




80e768f8

7-4-4-proverka-raboty-startera.html

7.4.4. Check of work of a starter





ATTENTION
Check has to be made in the range of 3–5 with in order to avoid damage of a winding of the stator.

Check of the involving winding of the traction relay.
Disconnect a wire from a starter conclusion "With".

Fig. 7.36. Connection of a wire of the rechargeable battery to conclusions of the traction relay


Connect wires from the rechargeable battery to conclusions of the traction relay as it is specified in the figure 7.36.
Make sure that the gear wheel of the obgonny coupling moved forward outside.
If the leading gear wheel of the obgonny coupling does not move forward, then replace the traction relay.
Check of the holding winding.

Fig. 7.37. Check of the holding winding


At the connections executed in the order specified in the previous check, and the put-forward leading gear wheel of the obgonny coupling disconnect a negative wire from a conclusion "With" (fig. 7.37).
Make sure that the leading gear wheel remains put forward.
If the leading gear wheel comes back inside, then replace the traction relay.
Check of return of the leading gear wheel of the obgonny coupling.

Fig. 7.38. Check of return of the leading gear wheel of the obgonny coupling


Disconnect a negative wire from the case of the traction relay (fig. 7.38).
Make sure that the leading gear wheel of the obgonny coupling was involved inside.
If the leading gear wheel of the obgonny coupling was not involved, then replace the traction relay assembled.

Check of work of a starter without loading.

Fig. 7.39. Check of work of a starter without loading


Connect wires from the rechargeable battery and from the ampermeter to a starter as it is specified in the figure 7.39.
Check that the anchor of a starter rotates evenly and the leading gear wheel of the obgonny coupling is put forward. Measure current by means of the ampermeter.
Nominal current at 11,5 B: 90 A.

"previous page
7.4.3.2. Removal and installation of a starter (model with the engine 1MZ-FE)
following page"
7.4.4.1. Check of the relay of a starter