Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
2. Engine
3. Transmission
4. Running gear
5. Steering
6. Brake system
7. Onboard electric equipment
7.1. General information
7.2. Rechargeable battery
7.3. System of power supply
7.4. System of electrostart-up
7.5. Checks of onboard electric equipment
7.5.1. The ignition lock (the warning system about the key forgotten in the lock)
7.5.2. Check of vyklyuchatetel of locks of doors
7.5.2.1. Check of the electric lock of a forward door from the driver
7.5.2.2. Check of the electric lock of a forward door from the passenger
7.5.2.3. Check of the electric lock of a back right door
7.5.2.4. Check of the electric lock of a back left door
7.5.2.5. Check of the electric lock of a door of a luggage carrier
7.5.3. Check of switches of locks of doors (for models with system of double blocking)
7.5.4. Check of power windows
7.5.5. Check of switches of adjustment of seats
7.5.6. Check of electric motors of adjustment of seats
7.5.7. Check of thermal safety locks
7.5.8. Check of the electric motor of a washer
7.5.9. Check of conductivity of the switch of adjustment of provision of a mirror
7.5.10. Check of the relay of a heater of back glass
7.5.11. Check of an internal rear-view mirror
7.5.12. Safety locks and relay
7.6. Tables
8. Body
9. Schemes of electric equipment




80e768f8

7-5-2-2-proverka-ehlektricheskogo-zamka-perednejj-dveri-so-storony-passazhira.html

7.5.2.2. Check of the electric lock of a forward door from the passenger

Fig. 7.60. Check of the switch of the central lock of a forward door from the passenger


Check existence of conductivity of a signal between conclusions of the socket and the switch of the central lock in the provisions specified in the table.
Be convinced also of lack of a signal of conductivity in situation "is switched off" - "OFF".
If conductivity does not correspond to data in the table, replace the switch.

Standard check

Check operation of the electric drive of the lock of a door of the passenger in the provisions specified in the table.
Having connected the positive plug of the rechargeable battery to a conclusion "4" and the negative plug – to a conclusion "1", be convinced that the latch of the lock passed into the provision of "LOCK". Change polarity of conclusions of the socket and be convinced that the latch of the lock passed into situation "UNLOCK".

Fig. 7.61. Check of operation of the electric drive of the lock of a forward door from the passenger


If operation of the electric drive does not correspond to described, replace the lock assembled.

Standard check

Check existence of conductivity of a signal between conclusions of the socket and the switch of the lock of a door from the passenger in the provisions specified in the table.
If conductivity does not correspond to data in the table, replace the lock assembled.

Standard check

"previous page
7.5.2.1. Check of the electric lock of a forward door from the driver
following page"
7.5.2.3. Check of the electric lock of a back right door