Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
2. Engine
3. Transmission
4. Running gear
5. Steering
6. Brake system
7. Onboard electric equipment
8. Body
8.1. General information
8.2. Features of a design of a body of the Camry car
8.3. Adjustment of hinged components of a body
8.4. Removal of hinged components and decorative overlays of a body
8.5. Glasses
8.6. Headlights
8.7. Screen wipers
8.8. Conditioner and heater
8.9. Tables
9. Schemes of electric equipment




80e768f8

8-1-obshhie-svedeniya.html

8.1. General information

The body of the Camry cars – bearing four-door, consists of a framework and hinged elements. The framework of a body includes the basis, sidewalls, a roof and details of a framework connected with each other by electric welding (dot, sutural and arc), and represents the non-demountable design having sufficient rigidity and capable to bear on itself all units of the car, hinged knots of a body and a detail of an interior.
Separate parts of a body promote achievement of extreme durability of a body therefore control welding in the course of performance of repair work. If when carrying out repair work factory consolidation or an anticorrosive covering collapses or damaged, apply an anticorrosive covering and consolidation on details of the lower part of a body. When drawing an anticorrosive covering on a detail of the lower part of a body apply anticorrosive chromium plating. Application of the combined means is not recommended.
The lower casing of the transmission – the uniform steel element serving for protection of the lower part of the transmission. This covering protects from hit of small stones, gravel or other objects in the transmission in the conditions of normal driving.

ATTENTION
Heavy body repair, and also replacement of the pasted wind and back glasses have to be carried out, as a rule, in the conditions of service station of the official dealer of Toyota where for this purpose are available all necessary equipment and devices.

Side doors, cowl, back door, forward wings, buffers and facing of a radiator belong to hinged knots. Doors, a cowl and a trunk lid fasten on a body by means of loops. Forward wings fasten to a body bolts.
Forward and back buffers fasten bolts. Facing of a radiator fastens by means of plastic clamps and screws.
Windshield – three-layer the Triplex type. Glasses of doors, side and back flew down – tempered. Wind, back and side glasses are pasted in window openings of a body.
Front seats – separate, with mechanisms of adjustment of an inclination of backs and movements in the longitudinal direction, with the easily removable head restraints regulated on height. A back seat – with the integral pillow and a back divided by a folding armrest into two parts.
Lobbies and back side seat belts – inertial, and a back belt of the average passenger – zone not inertial.
In interior of the car the lighter, forward and back ashtrays, antisolar peaks, a heater, rear-view mirrors, hand-rail are installed.
The car is equipped with forward and back eyes for towage.

"previous page
8. Body
following page"
8.2. Features of a design of a body of the Camry car