Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
2. Engine
3. Transmission
4. Running gear
5. Steering
6. Brake system
7. Onboard electric equipment
8. Body
8.1. General information
8.2. Features of a design of a body of the Camry car
8.3. Adjustment of hinged components of a body
8.3.1. Adjustment of forward doors
8.3.1.1. Adjustment of a bracket of the lock
8.3.2. Adjustment of back doors
8.3.3. Adjustment of a cowl
8.3.4. Adjustment of a trunk lid
8.4. Removal of hinged components and decorative overlays of a body
8.5. Glasses
8.6. Headlights
8.7. Screen wipers
8.8. Conditioner and heater
8.9. Tables
9. Schemes of electric equipment




80e768f8

8-3-1-regulirovka-perednikh-dverejj.html

8.3.1. Adjustment of forward doors





NOTE
Procedures of adjustment of the left and right forward doors are identical.


Fig. 8.8. Centering and standard bolts


NOTE
Because at adjustment of doors it is impossible to use centering bolts which door loops fasten, replace them with bolts with washers (standard bolts).



Fig. 8.9. Admissions of size of gaps of doorways


Examine forward doors and check that the size of gaps of doorways was in limits of the admissions designated in the figure 8.9.

NOTE
The size of admissions is given in mm.

If the size of gaps differs from specified, adjust the provision of doors.

Fig. 8.10. Adjustment of longitudinally vertical position of a forward door


Having used the special tool 09812-00010, weaken fastening of door loops and adjust the provision of doors in vertical and longitudinal provisions (fig. 8.10).
Moment of an inhaling of adjusting bolts: 26 N · m.

Fig. 8.11. Adjustment of cross vertical position of a forward door


If it is necessary, adjust also cross vertical position of doors (fig. 8.11).
Moment of an inhaling of adjusting bolts: 26 N · m.

"previous page
8.3. Adjustment of hinged components of a body
following page"
8.3.1.1. Adjustment of a bracket of the lock