Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
2. Engine
3. Transmission
4. Running gear
5. Steering
6. Brake system
7. Onboard electric equipment
8. Body
8.1. General information
8.2. Features of a design of a body of the Camry car
8.3. Adjustment of hinged components of a body
8.3.1. Adjustment of forward doors
8.3.2. Adjustment of back doors
8.3.2.1. Adjustment of a bracket of the lock
8.3.3. Adjustment of a cowl
8.3.4. Adjustment of a trunk lid
8.4. Removal of hinged components and decorative overlays of a body
8.5. Glasses
8.6. Headlights
8.7. Screen wipers
8.8. Conditioner and heater
8.9. Tables
9. Schemes of electric equipment




80e768f8

8-3-2-regulirovka-zadnikh-dverejj.html

8.3.2. Adjustment of back doors





NOTE
Procedures of adjustment of the left and right back doors are identical.


Fig. 8.13. Admissions of size of gaps of doorways


Examine back doors and check that the size of gaps of doorways was in limits of the admissions designated in the figure 8.13.

NOTE
The size of admissions is given in mm.

If the size of gaps differs from specified, adjust the provision of doors.
Disconnect the next to central racks a percussion cap of fastening of finishing of a threshold of a back door.
Disconnect the percussion cap of fastening of finishing of a threshold of a forward door, next to the central rack.
Remove finishing of the central rack.

Fig. 8.14. Adjustment of longitudinally vertical position of a back door


Weaken fastening of door loops and adjust the provision of doors in vertical and longitudinal provisions (fig. 8.14).
Moment of an inhaling of adjusting bolts: 26 N · m.

Fig. 8.15. Adjustment of cross vertical position of a back door


If it is necessary, adjust also cross vertical position of doors (fig. 8.15).
Moment of an inhaling of adjusting bolts: 26 N · m.

"previous page
8.3.1.1. Adjustment of a bracket of the lock
following page"
8.3.2.1. Adjustment of a bracket of the lock