Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
2. Engine
3. Transmission
4. Running gear
5. Steering
6. Brake system
7. Onboard electric equipment
8. Body
8.1. General information
8.2. Features of a design of a body of the Camry car
8.3. Adjustment of hinged components of a body
8.3.1. Adjustment of forward doors
8.3.2. Adjustment of back doors
8.3.3. Adjustment of a cowl
8.3.4. Adjustment of a trunk lid
8.3.4.1. Adjustment of provision of a bracket of the lock of a trunk lid
8.4. Removal of hinged components and decorative overlays of a body
8.5. Glasses
8.6. Headlights
8.7. Screen wipers
8.8. Conditioner and heater
8.9. Tables
9. Schemes of electric equipment




80e768f8

8-3-4-regulirovka-kryshki-bagazhnika.html

8.3.4. Adjustment of a trunk lid





Fig. 8.22. Admissions of size of gaps of a trunk lid


Examine a trunk lid and check that the size of gaps of apertures of a cover was in limits of the admissions designated in the figure 8.22.

NOTE
The size of admissions is given in mm.

If the size of gaps differs from specified, adjust the provision of a trunk lid.
Disconnect 11 percussion caps and remove facing of a trunk lid.

Fig. 8.23. Adjustment of provision of a trunk lid


For adjustment in the longitudinal and cross directions weaken bolts of fastening of levers of a trunk lid (fig. 8.23).

"previous page
8.3.3.1. Adjustment of position of the lock of a cowl
following page"
8.3.4.1. Adjustment of provision of a bracket of the lock of a trunk lid