Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
2. Engine
3. Transmission
4. Running gear
5. Steering
6. Brake system
7. Onboard electric equipment
8. Body
8.1. General information
8.2. Features of a design of a body of the Camry car
8.3. Adjustment of hinged components of a body
8.4. Removal of hinged components and decorative overlays of a body
8.4.1. Removal of a front bumper
8.4.2. Removal of a rear bumper
8.4.3. Removal and installation of a back spoiler
8.4.4. Removal and installation of the top molding
8.4.5. Removal and installation of moldings of forward and back doors
8.4.6. Removal and installation of the lower molding
8.4.7. Removal and installation of a decorative overlay of a luggage carrier
8.4.8. Removal and installation of decorative emblems and fonts
8.5. Glasses
8.6. Headlights
8.7. Screen wipers
8.8. Conditioner and heater
8.9. Tables
9. Schemes of electric equipment




80e768f8

8-4-2-snyatie-zadnego-bampera.html

8.4.2. Removal of a rear bumper

Fig. 8.37. Dismantling components of a rear bumper: 1 – arms of fastening of facing of a luggage carrier; 2 – facing of a luggage carrier; 3 – the amplifier of a bumper from a body; 4 – bumper shock-absorber; 5 – side holders of a bumper; 6 – rear bumper; 7 – internal фи


Dismantling components of a rear bumper are shown in fig. 8.37.
You make installation as it should be, the return to removal.
Remove a floor mat of the luggage compartment.
Take out a spare wheel assembled with a fastening arm.

Fig. 8.38. Removal of facing of a luggage carrier


Disconnect clips and remove facing of a luggage carrier (fig. 8.38).
Disconnect two clips and remove internal finishing of a luggage carrier.
Turn off eight nuts, four bolts and disconnect four clips of fastening of a rear bumper.

Fig. 8.39. Removal of a rear bumper


Unscrew two screws, remove side holders of a bumper and remove a rear bumper (fig. 8.39).
Take out percussion caps and remove clamps from the inside of a bumper.
Remove the bumper shock-absorber.
Turn off six nuts of fastening and remove the amplifier of a bumper from a body.

"previous page
8.4.1. Removal of a front bumper
following page"
8.4.3. Removal and installation of a back spoiler