Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
2. Engine
3. Transmission
4. Running gear
5. Steering
6. Brake system
7. Onboard electric equipment
8. Body
8.1. General information
8.2. Features of a design of a body of the Camry car
8.3. Adjustment of hinged components of a body
8.4. Removal of hinged components and decorative overlays of a body
8.4.1. Removal of a front bumper
8.4.2. Removal of a rear bumper
8.4.3. Removal and installation of a back spoiler
8.4.4. Removal and installation of the top molding Removal Installation
8.4.5. Removal and installation of moldings of forward and back doors
8.4.6. Removal and installation of the lower molding
8.4.7. Removal and installation of a decorative overlay of a luggage carrier
8.4.8. Removal and installation of decorative emblems and fonts
8.5. Glasses
8.6. Headlights
8.7. Screen wipers
8.8. Conditioner and heater
8.9. Tables
9. Schemes of electric equipment


8-4-4-1-snyatie.html Removal

You make installation as it should be, the return to removal. If some actions for installation have distinctive features, then they are mentioned in appropriate section with the general name "Installation".

Fig. 8.44. Removal of the top molding

Glue a contact surface of a body near a molding the protecting tape. Carefully, by means of the special tool for removal of slips release fastenings of clips of the top molding since two ends and remove a molding (fig. 8.44).

Do not delete clips. If the clip was damaged, replace it new original.

"previous page
8.4.4. Removal and installation of the top molding
following page" Installation