Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
2. Engine
3. Transmission
4. Running gear
5. Steering
6. Brake system
7. Onboard electric equipment
8. Body
8.1. General information
8.2. Features of a design of a body of the Camry car
8.3. Adjustment of hinged components of a body
8.4. Removal of hinged components and decorative overlays of a body
8.4.1. Removal of a front bumper
8.4.2. Removal of a rear bumper
8.4.3. Removal and installation of a back spoiler
8.4.4. Removal and installation of the top molding
8.4.5. Removal and installation of moldings of forward and back doors
8.4.6. Removal and installation of the lower molding
8.4.7. Removal and installation of a decorative overlay of a luggage carrier
8.4.8. Removal and installation of decorative emblems and fonts
8.5. Glasses
8.6. Headlights
8.7. Screen wipers
8.8. Conditioner and heater
8.9. Tables
9. Schemes of electric equipment




80e768f8

8-4-7-snyatie-i-ustanovka-dekorativnojj-nakladki-bagazhnika.html

8.4.7. Removal and installation of a decorative overlay of a luggage carrier

NOTE
You make installation as it should be, the return to removal. If some actions for installation have distinctive features, then they are mentioned in appropriate section with the general name "Installation".

Having disconnected 15 clips of fastening, remove a trunk lid upholstery.
Turn off four screws of fastening.
Wind the end of the screw-driver with a plaster. Having hooked the ends of a slip, remove it. The screw-driver and white spirit accurately clear dredging under a slip.
Glue a contact surface of a slip a new adhesive tape and establish an overlay for the place.

Fig. 8.48. Removal and installation of a decorative overlay of a luggage carrier


Tighten four screws of fastening (fig. 8.48).

"previous page
8.4.6. Removal and installation of the lower molding
following page"
8.4.8. Removal and installation of decorative emblems and fonts